ASRock Vision 3D 137D User Manual - Page 36
OC Tweak, weaker Screen, er Screen
View all ASRock Vision 3D 137D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
9.3 OC Tweaker Screen In the OC Tweaker screen, you can set up overclocking features. BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit OC Tweaker Settings Load CPU EZ OC Setting Load Memory EZ OC Setting CPU EZ OC Setting : 3.0GHz Overclock Mode BCLK Frequency (MHZ) Boot Failure Guard Boot Failure Guard Count Spread Spectrum [Press Enter] [Press Enter] [Auto] [167] [Enabled] [3] [Auto] Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. CPU Ratio Setting QPI Frequency DRAM Frequency DRAM Timing Control VCORE Voltage VCCM(DRAM) Voltage [Auto] [Auto] [Auto] [Auto] [Auto] Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Load CPU EZ OC Setting You can use this option to load CPU EZ overclocking setting. Please note that overclocing may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Load Memory EZ OC Setting You can use this option to load memory EZ overclocking setting. Please note that overclocing may cause damage to your memory module and motherboard. It should be done at your own risk and expense. Overclock Mode Use this to select Overclock Mode. Configuration options: [Auto], [Manual] and [Optimized]. The default value is [Auto]. BCLK Frequency (MHz) Use this option to adjust BCLK (Internal Base Clock) frequency. Boot Failure Guard Enable or disable the feature of Boot Failure Guard. Boot Failure Guard Count Enable or disable the feature of Boot Failure Guard Count. Spread Spectrum This item should always be [Auto] for better system stability. CPU Ratio Setting If the ratio status is unlocked, you will find this item appear to allow you changing the ratio value of this motherboard. QPI Frequency Use this option to adjust QPI (QuickPath Interconnect) frequency. Configuration options: [Auto], [3.200GT], [3.733GT], [4.266GT] and [4.800GT]. The default value is [Auto]. 36