ASRock Vision HT 323B RAID Installation Guide - Page 9
After you set disk block size, press <Enter> to set disk
![]() |
View all ASRock Vision HT 323B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Volume0 If you selected RAID 0 (Stripe), use the up or down arrow keys to select the stripe size for your RAID 0 array then press .The available values range from 8 KB to 128 KB. The default selection is 128 KB. The strip value should be chosen based on the planned drive usage. • 8 /16 KB - low disk usage • 64 KB - typical disk usage • 128 KB - performance disk usage After you set disk block size, press to set disk Capacity. Volume0 After setting up Capacity, please press . 9
![](/manual_guide/products/asrock-vision-ht-raid-installation-guide-2637cf2/9.png)
9
Volume0
If you selected RAID 0 (Stripe), use the up or down arrow keys to
select the stripe size for your RAID 0 array then press <Enter>.The
available values range from 8 KB to 128 KB. The default selection is
128 KB. The strip value should be chosen based on the planned
drive usage.
• 8 /16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
After you set disk block size, press <Enter> to set disk
Capacity
.
After setting up
Capacity
, please press <enter>.
Volume0