ASRock Vision HT 400D User Manual - Page 40
Vcore Voltage Additional Offset, FIVR Switch Frequency Offset
View all ASRock Vision HT 400D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Vision HT Series IO-L (CHA) Configure IO latency for channel A. IO-L (CHB) Configure IO latency for channel B. ODT WR (CHA) Configure the memory on die termination resistors' WR for channel A. ODT WR (CHB) Configure the memory on die termination resistors' WR for channel B. ODT NOM (CHA) Use this to change ODT (CHA) Auto/Manual settings. The default is [Auto]. ODT NOM (CHB) Use this to change ODT (CHB) Auto/Manual settings. The default is [Auto]. Command Tri State Enable for DRAM power saving. MRC Fast Boot Enable Memory Fast Boot to skip DRAM memory training for booting faster. DIMM Exit Mode Select Slow Exit to reduce power consumption, or Fast Exit for better performance. FIVR Configuration FIVR Switch Frequency Signature Select whether to boost or lower the FIVR Switch Frequency. FIVR Switch Frequency Offset Configure the percentage of frequency boost or deduction. Vcore Override Voltage Configure the voltage added to the Vcore when the system is under heavy load. Vcore Voltage Additional Offset Configure the dynamic Vcore voltage added to the Vcore. 33 English