ASRock Vision HT Vision HT 421D RAID Installation Guide - Page 14
Strip Size
View all ASRock Vision HT Vision HT 421D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Use the up or down arrow keys to select your desired RAID Level. You may select RAID 0 (Stripe), RAID 1 (Mirror), RAID 5 or RAID 10 for your RAID level. Press , and then you can select Strip Size. Volume0 Volume0 If you selected RAID 0 (Stripe), use the up or down keys to select the stripe size for your RAID 0 array then press . The available values range from 8 KB to 128 KB. The default selection is 128 KB. The strip value should be chosen based on the planned drive usage. •8/16 KB - low disk usage •64 KB - typical disk usage •128 KB - performance disk usage After you set disk block size, press to set disk Capacity. 14
14
Use the up or down arrow keys to select your desired
RAID
Level
. You may select RAID 0 (Stripe), RAID 1 (Mirror), RAID
5 or RAID 10 for your RAID level. Press <Enter>, and then you
can select
Strip Size
.
If you selected RAID 0 (Stripe), use the up or down keys to
select the stripe size for your RAID 0 array then press <Enter>.
The available values range from 8 KB to 128 KB. The default
selection is 128 KB. The strip value should be chosen based
on the planned drive usage.
•
8/16 KB - low disk usage
•
64 KB - typical disk usage
•
128 KB - performance disk usage
After you set disk block size, press <Enter> to set disk
Capacity
.
Volume0
Volume0