ASRock X570 Taichi User Manual - Page 85
Infinity Fabric Frequency and Dividers
View all ASRock X570 Taichi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
CPU Frequency and Voltage Change If this item is set to [Manual], the multiplier and voltage will be set based on user selection. Final result is depending on the CPU's capability. SoC/Uncore OC Voltage Specify the SoC/Uncore voltage (VDD_SOC) in mV to support memory and Infinity Fabric overclocking. VDD_SOC also determines the GPU voltage on processors with integrated graphics. "SoC/Uncore OC Mode" need to be enabled to force this voltage. SMT Mode This item can be used to disable symmetric multithreading. To re-enable SMT, a power cycle is needed after selecting [Auto]. Warning: S3 is not supported on systems where SMT is disabled. DRAM Timing Configuration Load XMP Setting Load XMP settings to overclock the memory and perform beyond standard specifications. DRAM Information Browse the serial presence detect (SPD) for DDR4 modules. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assign the appropriate frequency automatically. Infinity Fabric Frequency and Dividers Set Infinity Fabric Frequency and Dividers (FCLK). GFX Clock Frequency (Only for processor with integrated graphics) This item allows you to alter the frequency for the GFX clock frequency. After you alter the GFX Clock Frequency settings, make sure to adjust the GFX Core Voltage settings. *The adjustable range is dependent on the CPU being installed. GFX Core Voltage (Only for processor with integrated graphics) This item allows you to alter the voltage for the GFX Core Voltage. *The adjustable range is dependent on the CPU being installed. 78 English