ASRock X58 Extreme User Manual - Page 65

ACPI HPET Table Use this item to enable or disable ACPI HPET Table. The default value is [Disabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification. 3.4.4IDE Configuration BIOS SETUP UTILITY Advanced IDE Configuration SATAII Configuration Configure SATAII as Onboard IDE and 1394 Onboard eSATAII eSATAII Operation Mode SATAII 1 SATAII 2 SATAII 3 SATAII 4 SATAII 5 SATAII 6 IDE1 Master IDE1 Slave eSATAII AHCI CD/DVD Boot Time out [Enhanced] [IDE] [Enabled] [Enabled] [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [35] Options Disabled Compatible Enhanced +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. SATAII Configuration Please select [Compatible] when you install legacy OS. If native OS (Windows® XP / VistaTM) is installed, please select [Enhanced]. Then in the option "Configure SATAII as", you are allowed to set the selection to [IDE], [RAID] or [AHCI]. The default value is [IDE]. If you select [RAID] or [AHCI] mode, the options "Hot Plug" and "SATA Link Power Management" will appear. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages. Onboard IDE and 1394 Use this item to enable or disable onboard IDE and 1394. The default value is [Enabled]. Onboard eSATAII Use this item to enable or disable onboard eSATAII. The default value is [Enabled]. 65