ASRock Z790 Taichi User Manual - Page 65
the nut to be used. Hand tighten
View all ASRock Z790 Taichi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2 1 B A B A Z790 Taichi Step 3 1 Before installing a M.2 SSD module, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD module. Step 4 Move the standoff based on the module type and length. The standoff is placed at the nut location B by default. Skip Step 4 and 5 and go straight to Step 6 if you are going to use the default nut. Step 5 Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard. 61
61
Z790 Taichi
Step 3
Before installing a M.2 SSD
module, please loosen the screws to
remove the M.2 heatsink.
*Please remove the protective films
on the bottom side of the M.2
heatsink before you install a M.2
SSD module.
B
A
Step 4
Move the standoff based on the
module type and length.
°e standoff is placed at the nut
location B by default. Skip Step 4
and 5 and go straight to Step
6
if you
are going to use the default nut.
B
A
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
standoff into the desired nut location
on the motherboard.
2
1
1