ASRock Z97 Extreme6 Quick Installation Guide - Page 28
time, use Intel® Z97 SATA
View all ASRock Z97 Extreme6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
SATA3_2_5 SATA3_1_4 SATA3_0_3 SATA3_A1_A2 SATA3_A3_A4 Power LED Header (3-pin PLED1) (see p.1, No. 18) Serial ATA3 Connectors (SATA3_0_3: see p.1, No. 12) (SATA3_1_4: see p.1, No. 13) (SATA3_2_5: see p.1, No. 14) (SATA3_A1_A2: see p.1, No. 11) (SATA3_A3_A4: see p.1, No. 10) 1 PLED- PLED+ PLED+ Please connect the chassis power LED to this header to indicate the system's power status. These ten SATA3 connectors support SATA data cables for internal storage devices with up to 6.0 Gb/s data transfer rate. If the eSATA port on the rear I/O has been connected, the internal SATA3_A4 will not function. The SATA3_4, SATA3_5 are shared with the SATA Express connector. To minimize the boot time, use Intel® Z97 SATA ports (SATA3_0) for your bootable devices. Serial ATA Express Connector (SATAE_1: see p.1, No. 15) 26 Please connect either SATA or PCIe storage devices to this connector. The SATA Express connector is shared with the SATA3_4, SATA3_5 and the M.2_SSD (NGFF) Socket 3 (M2_2). *The SATA Express interface is a combination of SATAE_1, SATA3_4, and SATA3_5. English