ASRock Z97M-ITX/ac User Manual - Page 31
ATX 12V Power, ATX Power Connector
View all ASRock Z97M-ITX/ac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC'97 audio panel, please install it to the front panel audio header by the steps below: A. Connect Mic_IN (MIC) to MIC2_L. B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L. C. Connect Ground (GND) to Ground (GND). D. MIC_RET and OUT_RET are for the HD audio panel only. You don't need to connect them for the AC'97 audio panel. E. To activate the front mic, go to the "FrontMic" Tab in the Realtek Control panel and adjust "Recording Volume". Chassis Fan Connector (4-pin CHA_FAN1) (see p.6, No. 3) CPU Fan Connector (4-pin CPU_FAN1) (see p.6, No. 1) ATX Power Connector (24-pin ATXPWR1) (see p.6, No. 7) ATX 12V Power Connector (4-pin ATX12V1) (see p.6, No. 2) GND +12V CHA_FAN_SPEED FAN_SPEED_CONTROL Please connect fan cable to the fan connector and match the black wire to the ground pin. GND +12V CPU_FAN_SPEED FAN_SPEED_CONTROL This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3. 12 24 1 13 This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. Please connect an ATX 12V power supply to this connector. English 26