Aastra Dialog 4106 Dialog 4106 Basic/4147 Medium for MX-ONE (TSE), user guide - Page 27
Dial by a function key
View all Aastra Dialog 4106 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Outgoing Calls u î Head Office Dial by a function key Note: For for the Dialog 4147 phone, make sure that the programming slide switch is set to the "Prog On" position. See section "Enable/Disable Program key" on page 64. You can program and activate directory numbers (extensions and Common Abbreviated Numbers) on the programmable keys. On the Dialog 4106 you can also store one number on the Message key. Stored numbers can consist of maximum 21 digits. Lift the handset. Wait for dial tone. Press to make a call (preprogrammed). Note: To dial a number that is stored on the second level, press the Message Waiting/2nd key before pressing the preprogrammed key. Program Program a directory number on the programmable keys. u ¥ î On the Dialog 4106 Basic phone: The Dialog 4106 has four keys for programming; the three programmable keys and the Message key. Notes: To store a number on the Message key, just press the key during the following procedure like a normal programmable key. If you press an invalid key during programming, the programming mode will be terminated automatically and you will hear a special rejection tone. Lift the handset. Wait for dial tone. Press. Press a programmable key. If a number is already stored, it will be erased automatically. If you would like to erase a number, store a 0 instead of the telephone number. Dialog 4106 Basic/Dialog 4147 Medium 27