Aastra Dialog 4225 Dialog 4223 Professional/4225 Vision for MX-ONE (TSE), user - Page 126
Select, Local Test Mode, Selftest OK
View all Aastra Dialog 4225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Troubleshooting Å Down or Up Select Exit Dialog 4225 Vision: Select PhoneSet in the top menu (see display). Press to frame Local Test Mode (see display). Press (see display). The display shows the firmware revision state and Selftest OK for a few seconds. If there is something wrong, a fault message appears. Inform your system administrator about the fault message. All the key lamps on the phone and connected extra key panels should be switched on during the self-test to indicate that each key lamp is OK. After a few seconds the display is checked (the display is completely dark). The display is OK when there are no light dot(s) or line(s). The light frame around the display should be there. Press the left most display Menu key to exit (see display). (However the text is not visible when the display has turned black, the exit feature is still on that Menu key). Note: If you do not press Exit, the self-test is automatically finished after about 30 seconds. 126 Dialog 4223 Professional/Dialog 4225 Vision