Acer AL2671W AL2671W Service Guide - Page 36
Removing the LCD Module, Remove the eight screws that secure the PCB tray.
View all Acer AL2671W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
9. Remove one screw holding the cable then remove the cable. Removing the LCD Module 1. Disconnect the inverter cable. 2. Tear off the tape on the inverter shielding. 3. Remove the two screws holding the LCD right bracket. 4. Remove the LCD right bracket. 5. Remove the three screws holding the inverter shielding. 6. Detach the inverter shielding carefully. 7. Remove the eight screws that secure the PCB tray. 8. Detach the PCB tray as shown. 9. Then disconnect the cable (main board to LCD). 50 Chapter 3