Acer AR160 F1 User Manual - Page 116
Adaptec onboard SATA RAID Creation, Configuring Adaptec onboard SATA RAID
View all Acer AR160 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
100 Appendix A Server management tools 8 Now that the RAID volume is created, you can press ESC or select option 5. Exit to exit. Assigning Hot Spare drive The Intel onboard SATA RAID Configuration Utility in POST does not provide the function to assign a hot spare driver. Please assign a hot spare driver with Intel onboard SATA RAID utility installed in the operating system. Adaptec onboard SATA RAID Creation Configuring Adaptec onboard SATA RAID This section explains briefly how to create a RAID volume with the Adaptec onboard SATA RAID. Enabling the Adaptec onboard SATA RAID controller 1 Turn on the server and the display monitor. If the server is already turned on, please close all open applications and then restart the server. 2 During POST, press to access the BIOS Setup Utility. 3 Select the Advanced > IDE/SATA Configuration submenu. 4 Change the setting of the Configure SATA#1 as field from IDE to RAID. 5 Select Adaptec of ICH Raid CodeBase option. 6 Press F10. 7 Select Ok to save the setting and close the Setup Utility. Entering Adaptec onboard SATA RAID Configuration Utility To start the Adaptec onboard SATA RAID Configuration Utility, please press CTRL-A when you see the RAID BIOS during POST. After POST finished, the Adaptec RAID Configuration Utility will display on the screen. Creating RAID Volume 1 Select the Array Configuration Utility option. 2 Select Create Array. 3 The screen displays Select drives to create Array.