Acer AT2617MF User Manual - Page 32

English Channel install Automatic search Automatic search allows you to scan for channels. If you completed the setup wizard the first time you turned on your TV, all available channels are listed. Wait until the scan has finished; this will take several minutes. During the scanning process, press MENU or BACK to abort halfway with all searched channels saved. Automatic update If the tuner mode is Antenna, you can use Automatic update to scan for new or deleted channels. Analog manual installation You can manually add an analog channel by adjusting the settings here. Digital manual installation You can manually add a digital channel by searching in specific UHF channels. Organiser You can use these settings to skip channels, change a channels' number and name or sort channels. Channel skip Use the up/down directional keys to select a channel and press OK to check/uncheck the box. If checked, the channel is skipped. The skipped channel can not be accessed by pressing the CH+/- keys but can accessed by entering the channel number. Channel sort You can exchange two channels. Use the up/down directional keys to select a channel and press OK to select with a tick icon. Then use the up/down directional keys to select another channel and press OK to exchange. Channel edit Use the up/down directional keys to select a channel and press OK to enter the editing menu. Use the left/right directional keys to move the cursor and the number keys to enter channel number or channel name and press OK to save and back to the previous menu. Input settings Select a type of apparatus for each connector with equipment connected. Decode Use the up/down directional keys to select an analog channel and press OK to decode. Diagnostics Display some signal information on curent digital channel. Reset shop Allow you to reset the TV to factory default settings. You have to enter a correct password to reset all settings. After resetting the initial setup menu will appear. 32