Acer Altos G520 Altos G520 User's Guide - Page 56
To install the Hot Plug HDD cage
View all Acer Altos G520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
46 3 Upgrading the system 4 Install a hard disk in the hard disk carrier then secure it with the four screws you removed earlier. 5 Insert the hard disk carrier into the cage with the lever fully extended. 6 Push the lever back until it clicks into place. Make sure that the drive is properly inserted before closing the lever. To install the Hot Plug HDD cage 1 Detach the chassis panels and remove the air baffle. 2 Connect the following cables to the backplane board (SCSI): a SCSI cable b SCSI HDD 6 pin management cable
3 Upgrading the system
46
4
Install a hard disk in the hard disk carrier then secure it with the
four screws you removed earlier.
5
Insert the hard disk carrier into the cage with the lever fully
extended.
6
Push the lever back until it clicks into place.
Make sure that the
drive is properly inserted before closing the lever.
To install the Hot Plug HDD cage
1
Detach the chassis panels and remove the air baffle.
2
Connect the following cables to the backplane board (SCSI):
a
SCSI cable
b
SCSI HDD 6 pin management cable