Acer Altos G540 M2 User Manual - Page 58
Removing a HDD cage, cables from the backplane board, then remove all HDDs
View all Acer Altos G540 M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
48 3 System upgrade (2) Connect the SAS/SATA2 cable to the SAS/CON connector of the backplane board. 5 Observe the post-installation instructions described on page 42. For instructions on how to install a hard drive in an easy-swap HDD cage, go to page 57. For instructions on how to install a hard drive in a hot-plug HDD cage, go to page 55. Removing a HDD cage 1 Perform the pre-installation instructions described on page 41. 2 Prepare the HDD cage for removal. • For a hot-plug HDD cage, disconnect the data and power cables from the backplane board, then remove all HDDs from the cage. • For an easy-swap HDD cage, disconnect the data and power cables from their HDD connectors, then remove all HDDs from the cage. 3 Remove the HDD cage. (1) Move the release slider all the way up to unlock the hot-plug HDD cage.