Acer Altos R380 F3 Installation & Configuration Guide - Page 19
Intel Onboard SATA RSTe RAID, WINDOWS SERVER 2012
View all Acer Altos R380 F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Altos R380 F3 Installation Configuration Guide WINDOWS SERVER 2012 Intel Onboard SATA RSTe RAID Below information describes how to manually install Windows Server 2012 on Altos R380 F3 with Intel Onboard SATA RSTe RAID. BIOS Required Altos R380 F3 BIOS 01.01.0008 (or later) can support Windows Server 2012. Drivers Required Device Intel Onboard SATA RSTe RAID Chipset Onboard VGA Version Driver Source 4.1.0.1046 Resource Kit v1.0 10.0.20.0 4.1.1.5 Resource Kit v1.0 Resource Kit v1.0 Onboard Gigabit Ethernet Management Engine Interface Package 19.3 Resource Kit v1.0 1.2.3.2005 Resource Kit v1.0 Software Required Software Intel Onboard SATA RSTe RAID Utility PROSet Version Software Source 4.1.0.1046 Resource Kit v1.0 Package 19.3 Resource Kit v1.0 Configuring Intel Onboard SATA RSTe RAID Please refer to Appendix A. for Intel Onboard SATA RSTe RAID configuration. Installation Tips NOTE. Please refer to Altos R380 F3 FAQ (Frequently Asked Questions) to select OS installation in EFI mode or Legacy mode if the OS media supports EFI. NOTE. Windows Server 2012 cannot detect Intel Onboard SATA RSTe RAID. Please load the RAID driver during OS installation. NOTE. You need an external USB floppy drive or USB Flash drive to load RAID driver during the OS installation. 12