Acer Aspire 1360 Aspire 1360 - 1520 Service Guide - Page 38
Power Management, Environmental Requirements, AC Adapter, Enter Hibernation Mode suspend to HDD
View all Acer Aspire 1360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
AC Adapter Item Over Voltage Protection (OVP) Short circuit protection Electrostatic discharge (ESD) Dielectric Withstand Voltage Primary to secondary Ground leakage current 29V 9.5A @19V output voltage 15KV (at air discharge) 8KV (at contact discharge) Specification 2150VDC for 1 sec. less than 250uA Power Management Power Saving Mode Standby Mode Enter Standby Mode when 1.Standby/Hibernation hot-key is pressed and system is not ready to enter Hibernation mode. 2.System standby/ Hibernation timer expires and system is not ready to enter Hibernation mode. Hibernation Mode Enter Hibernation Mode (suspend to HDD) when 1.Hibernation hot-key is pressed and system is ready to enter Hibernation mode 2.System Hibernation timer expires and system is ready to enter Hibernation mode. Display Standby Mode Keyboard, built-in touchpad, and an external PS/2 pointing device are idle for a specified period. Hard Disk Standby Mode Hard disk is idle within a specified period of time. Phenomenon T The buzzer beeps T The Sleep indicator lights up T All power shuts off T The display shuts off T Hard disk drive is in standby mode. (spindle turned-off) Environmental Requirements Item Temperature Operating Non-operating Humidity Operating Non-operating Non-operating Vibration Operating Non-operating (unpacked) Non-operating (packed) Specification +5~+35 °C -20~+60 °C 10% to 95% RH, non-condensing without disktte 10% to 80% RH, non-condensing with disktte 20% to 80% RH, non-condensing (Unpacked) 20% to 90% RH, non-condensing (Storage package) 5~250Hz 0.5Grms, 15mins per axis 1.04 Grms, 2-200Hz 15 mins per axis 1.04 Grms, 2-200Hz 15 mins per axis Chapter 1 29