Acer Aspire 1360 Aspire 1360 - 1520 Service Guide - Page 46

Advanced The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced settings of the system. PhoenixBIOS Setup Utility Info. Main Advanced Security Boot Exit Infrared Port (FIR) Base I/O address: Interrupt: DMA channel: [Enabled] [2F8] [IRQ 3] [DMA 1] Parallel port: Mode: Base I/O address: Interrupt: DMA channel: [Auto] [ECP] [378] [IRQ 7] [DMA 3] Infrared Port (FIR): [Enabled] Item Specific Help Configure Infrared Port using options: [Disable] No configuration [Enabled] User configuration [Auto] BIOS or OS chooses configuration (OS Controlled) Displayed when controlled by OS F1 Help Esc Exit ↑ ↓ Select Item ← → Select Menu F5/F6 Change Values Enter Select 4 Sub- Menu F9 Setup Defaults F10 Save and Exit The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings. . Parameter Infrared Port Base I/O address Interrupt DMA channel Parallel Port Mode Base I/O address Interrupt 37 Description Enables, disables or auto detects the infrared port. Sets the I/O address of the infrared port. Sets the interrupt request of the parallel port. Sets a DMA channel for the infrared port. Enables, disables or auto detects the parallel port. Sets the operation mode of the parallel port. Sets the I/O address of the parallel port. Sets the interrupt request of the parallel port. Options Enabled/Disabled/Auto 2F8/3F8/3E8/2E8 IRQ3/IRQ4 DMA/DMA3 Enabled/Disabled/Auto ECP, EPP, Output only or Bi- directional 378/278 IRQ7/IRQ5 Chapter 2