Acer Aspire 1800 Aspire 1800 Service Guide - Page 55
Disassemble the Keyboard, Disassemble the Panel Module, Remove the four screws located on the top case
View all Acer Aspire 1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Disassemble the Keyboard 1. With a flat screwdriver to push out the strip cover away from the system. 2. Disconnect the LCD wire set. The 2 connector cable from the panel to the mainboard as video shows here. 3. Remove the three screws to release the keyboard 4. Press the tabs on both side to disconnect the keyboard cable from mainboard. Then take it away 5. Tear the tape then pull the antenna cables thought the hole to the up case. Disassemble the Panel Module 1. Remove the four screws located on the top case 2. Then remove the two screws on the rear of the system 3. Detach the panel module away from the system Chapter 3 Aspire 1800