Acer Aspire 2000 Aspire 2000 Notebook Service Guide - Page 45

Insyde Software SCU Main Advanced Security May 20, 2003 5:40:09 Boot Exit ----Devices Product Name = Aspire 2000 Manufacture Name = Acer System BIOS Version = VGA BIOS Version = -----System CPU = Intel® Pentium ® CPU speed = 1400Mhz Internal Hard Disk = HITACHI_DK23EA-40-(PM) HDD Serial Number = 8D4648 DVD/CD-Rom Drive = UJDA740 DVD/CDROM-(SM) Serial Number = ( 32 bytes) Asset Tag Number = (32 bytes) UUID = (16 bytes) ----Memory Base = 640 KB Extended = 127MB VGA Memory = 32MB Setup system date, time. Enable boot logo and get system information. Parameter Product Name Manufacture Name BIOS Version VGA Version Internal Hard Disk DVD/CD-ROM Drive Serial Number Asset Tag UUID System Description This field will show product name. This field will show manufacturer name. This field reports the BIOS version of system. This field reports the VGA version of the system. This item will show the size of HDD installed on Primary IDE master. The hard disk size is automatically detected by the system. If there is no hard disk present or unknown type, "None" should be shown on this field. This item will show the model name of DVD/CDROM drive installed on system. The DVD/CD-ROM model name is automatically detected by the system. If there is no DVD/CD-ROM model present or unknown type, "None" should be shown on this field. This item will show the Serial number of system. This item will show the Asset Tag number of the system. This number only valid when there is an internal LAN device presents, otherwise, zero will be display in this field. First field reports the model name of processor. Second field reports CPU Speed. 38 Chapter 2