Acer Aspire 2000 Aspire 2000 Notebook Service Guide - Page 81

Undetermined Problems The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedures to isolate the failing FRU (do not isolate non-defective FRU). NOTE: Verify that all attached devices are supported by the computer. 1. Power-off the computer. 2. Visually check them for damage. If any problems are found, replace the FRU. 3. Remove or disconnect all of the following devices: ! Non-Acer devices ! Printer, mouse, and other external devices ! Battery pack ! Hard disk drive ! DIMM ! CD-ROM/Diskette drive Module ! PC Cards 4. Power-on the computer. 5. Determine if the problem has changed. 6. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. 7. If the problem remains, replace the following FRU one at a time. Do not replace a non-defective FRU: ! Main board ! LCD assembly 74 Chapter 4