Acer Aspire 4935 Service Guide - Page 58
Miscellaneous Utilities, Using Boot Sequence Selector, Using DMITools
View all Acer Aspire 4935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Miscellaneous Utilities Using Boot Sequence Selector Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. To use Boot Sequence Selector, perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen. 3. Select the desired boot sequence by entering the corresponding sequence, for example, enter BS2 to change the boot sequence to HDD|CD ROM|LAN|Floppy. Using DMITools The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool for hardware management. When the BIOS displays Verifying DMI pool data it is checking the table correlates with the hardware before sending to the operating system (Windows, etc.). To update the DMI Pool, perform the following steps: 1. Enter into DOS. 2. Execute dmitools. The following messages show dmitools usage: • dmitools /r ==> Read dmi string from memory • dmitools /wm xxxx ==> Write manufacturer name to EEPROM (max. 16 characters) • dmitools /wp xxxx ==> Write product name to EEPROM (max. 16 characters) • dmitools /ws xxxx ==> Write serial number to EEPROM (max. 22 characters) • dmitools /wu xxxx ==> Write uuid to EEPROM (Ignore String) • dmitools /wa xxxx ==> Write asset tag to EEPROM (max. 32 characters) NOTE: The following write examples (2 to 5) require a system reboot to take effect Example 1: Read DMI Information from Memory Input: dmitools /r Output: Manufacturer (Type1, Offset04h): Acer Product Name (Type1, Offset05h): eMachines xxxxx Serial Number (Type1, Offset07h): 01234567890123456789 UUID String (Type1, Offset08h): xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Asset Tag (Type3, Offset04h): Acer Asstag 48 Chapter 2