Acer Aspire 5336 Service Guide - Page 39

Main The Main screen allows the user to set the system time and date as well as enable and disable boot options and recovery. Information Main InsydeH20 Setup Utility Security Boot Exit System Time System Date Total Memory: Video Memory: Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode [08:56:55] [02/25/2010] 4095 MB [64 MB] [Enabled] [Enabled] [Disabled] [Enabled] [AHCI Mode] Rev. 3.5 Item Specific Help This is the help for the hour field. Valid range is from 0 to 23. INCREASE/REDUCE: F5/F6. F1 Help ESC Exit Select Item F5/F6 Change Values F9 Setup Default Select Menu Enter Select SubMenu F10 Save and Exit NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Parameter System Time System Date Total Memory Video Memory Quiet Boot Network Boot F12 Boot Menu D2D Recovery SATA Mode Description Sets the system time. The hours are displayed with 24hour format. Sets the system date. Displays the total memory available. Displays the available memory for Video. The notebook displays an illustration called the OEM screen during system boot instead of the traditional POST screen that displays the normal diagnostic messages. Enables, disables the system boot from LAN (remote server). Enables, disables Boot Menu during POST. Enables, disables D2D Recovery function. The function allows the user to restore the system to factory defaults. Control the mode in which the SATA controller should operate. Format/Option Format: HH:MM:SS (hour:minute:second) Format MM/DD/YYYY (month/day/year) N/A N/A Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or Disabled Option: AHCI Mode or IDE Mode Chapter 2 29