Acer Aspire 5610Z Aspire 5610 Service Guide - Page 47

Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer's BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when "Press to enter Setup" message is prompted on the bottom of screen). Press m to enter setup. The default parameter of F12 Boot Menu is set to "disabled". If you want to change boot device without entering BIOS Setup Utility, please set the parameter to "enabled". Press during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility. Information PhoenixBIOS Setup Utility Main Advanced Security Boot Exit CPU Type : CPU Speed : Genunie Intel (R) CPU 1.66GHz HDD Model Name : HDD Serial Number : ATAPI Model Name : None ATAPI Serial Number : None BIOS Version: VGA BIOS Ver V1.10 Intel V1256 Serial Number Asset Tag Number Produce Name Manufacturer Name: UUID: xxxxxxxxxxxxxxxxxxxxxx N/A TravelMate 4200 Acer xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 22 Byte 32 Byte 16 Byte 16 Byte 32 Byte F1 Help Esc Exit ↑ ↓ Select Item ← → Select Menu F5/F6 Change Values Enter Select 4 Sub-Menu F9 Setup Defaults F10 Save and Exit Chapter 2 37