Acer Aspire 9800 Service Guide - Page 53

Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer's BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press m during POST (when "Press to enter Setup" message is prompted on the bottom of screen). Press m to enter setup. The default parameter of F12 Boot Menu is set to "disabled". If you want to change boot device without entering BIOS Setup Utility, please set the parameter to "enabled". Press during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility. PhoenixBIOS Setup Utility Information Main Advanced Security Boot Exit CPU Type : CPU Speed : Genuine Intel (R) CPU [email protected] 2130 MHz IDE0 Model Name : Intel RAID0 IDE1 Model Name : TSSTcorpCD/DVDW TS-L632D-MP2YH1XBGALJEE System BIOS Version: V0.10 VGA BIOS Version: nVIDIA G73 E463 5.73.22.15FA KBC BIOS Version: V0.21 Serial Number Asset Tag Number Produce Name Manufacturer Name: UUID: xxxxxxxxxxxxxxxxxxxxxx N/A Aspire 9800 Acer Inc. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 22 Byte 32 Byte 16 Byte 16 Byte 32 Byte F1 Help Esc Exit ↑ ↓ Select Item ← → Select Menu Chapter 2 F5/F6 Change Values Enter Select 4 Sub-Menu F9 Setup Defaults F10 Save and Exit 47