Acer Aspire T180 Aspire E380/T180 - Power M8 Service Guide - Page 46

Power Management Setup Phoenix-Award WorkstationBIOS CMOS Setup Utility Power Management Setup ACPI Function ACPI Suspend Type Power Management Video Off Method HDD Power Down HDD Down In Suspend Soft-Off by Power Button WOL(PME#) WOR(RI#) USB Resume from S1/S3 PS2 K/B Resume from S1/S3 Resume By Alarm X Day of Month Alarm X Time (hh:mm:ss) Alarm ACPI AWAY Mode AMD K8 Cool&Quiet Control Power on After Power fail [Enabled] [S1&S3] [User Define] [DPMS Support] [Disabled] [Disabled] [Delay 4 Sec] [Disabled] [Disabled] [Enabled] [Enabled] [Disabled] 0 0 : 0 : 0 [Disabled] [Auto] [Former-Sts] Item Help Menu Level f mnlk : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help F5:Previous Values F7:Optimized Defaults Parameter ACPI Function ACPI Suspend Type Power Management Video Off Method HDD Power Down HDD Down In Suspend Soft-Off by Power Button Description Options Use this item to enable or disable ACPI function. Enabled Disabled Use this item to define how your system suspends. In the default, S3(STR), the suspend mode is a suspend to RAM, i.e., the system shut down with the exception of a refresh current to the system memory. S1&S3 This item is used to enable or disable users manually define power management. User define This item defines how the video is powered down to save power. This item is set to DPMS(Display Power Management Software) by default. DPMS Support The IDE hard drive will spin down if it is not accessed within a specified length of time. Disabled Enabled This item enables or disables whether the IDE Disabled hard drive to be down in suspend mode. Enabled Under ACPI(Advanced Configuration and Power management Interface) you can create a software power down. In a software power down, the system can be resumed by Wake Up Alarms. This item lets you install a software power down that is controlled by the power button on your system. If the item is set to Instant-Off, then the power button causes a software power down. If the item is set to Delay 4 Sec. Then you have to hold the power button down for four seconds to cause a software power down. Delay 4 Sec 39 Chapter 2