Acer Aspire T670 Aspire T670 and Power Fe Service Guide - Page 42

Integrated Peripherals All onboard peripherals can be set up through this menu. CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip SATA Mode x PATA IDE Set to SATA Port 0/2 Set to SATA Port 1/3 Set to USB Controller USB 2.0 Controller USB Keyboard Support USB Mouse Support AC97 Audio Onboard H/W LAN Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA [Enabled] [Enhanced] Ch.0 Master/Slave Ch.2 Master/Slave Ch.3 Master/Slave [Enabled] [Enabled] [Enabled] [Enabled] [Auto] [Enabled] [Disabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 Item Help Menu Level` KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save ESC: Exit F7: Default Settings F1: General Help Parameter On-Chip Primary PCI IDE On-Chip SATA Mode PATA IDE Set to SATA Port 0/2 Set to SATA Port 1/3 Set to USB 2.0 Controller USB Controller Description Options Enabled : Enable onboard 1st channel IDE port. Disabled : Disable onboard 1st channel IDE port Disabled : Disable this function Auto : BIOS will auto detect Combined : Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on the motherboard; 2 for SATA and the other for PATA IDE. Enhanced : Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6 HDDs to use Non-Combined : Set On-Chip SATA mode to Non-Combined, SATA will be simulated to PATA mode. Ch.1 Master/Slave : Set PATA IDE to Ch. 1 Master/Slave. Ch.0 Master/Slave : Set PATA IDE to Ch. 0 Master/Slave. This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to". If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/ Slave. This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to". If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/ Slave. Enable this item if the system supports USB 2.0 Enabled : Enable USB 2.0 Controller Disabled : Disable USB 2.0 Controller This item is used to enable or disable the on-chip Enabled : Enable USB Controller USB Disabled : Disable USB Controller Chapter 2 38