Acer Aspire V3-551 Acer V3-551 and 551G Notebook Service Guide - Page 60

Miscellaneous Tools Using DMITools The DMI (Desktop Management Interface) Tool copies BIOS information to EEPROM and used in the DMI pool for hardware management. When the BIOS shows Verifying DMI pool data, it is checking that the table correlates with the hardware before sending it to the operating system (Windows, etc.). To update the DMI Pool, perform the following: 1. Boot from DOS. 2. At the command prompt, execute dmitools [argument] [string] with one of the following arguments: • /r ==> Read DMI information from memory • /wm ==> Write Manufacturer Name to EEPROM (max. 16 characters) • /wp ==> Write Product Name to EEPROM (max. 16 characters) • /ws ==> Write Serial Number to EEPROM (max. 22 characters) • /wu ==> Write UUID to EEPROM (ignore string) • /wa ==> Write Asset Tag to EEPROM (max. 32 characters) The following examples show the commands and the corresponding output information: 1. Read DMI Information from Memory: Input: dmitools /r Output: Manufacturer (Type1, Offset04h): Acer Product Name (Type1, Offset05h): Aspire Serial Number (Type1, Offset07h): 01234567890123456789 UUID String (Type1, Offset08h): xxxxxxxx-xxxx-xxxx-xxxxxxxxxxxxxxxx Asset Tag (Type3, Offset04h): Acet Asstag 2. Write Manufacturer Name to EEPROM Input: dmitools /wm Acer 3. Write Product Name to EEPROM Input: dmitools /wp Aspire System Utilities 2-18