Acer Aspire easyStore H340 Aspire easyStore H340 Home Server Service Guide - Page 18

Entering BIOS setup IMPORTANT:To enter the BIOS setup, you need a debug board. 1. Turn off the computer and all attached devices. 2. Remove the cover. See "Removing the System Cover" on page 27. 3. Connect the debug board cable to the debug board connector on the mainboard. 4. Locate the JP3 Debug/User mode jumper on the mainboard. 5. Close the jumper to enable system for debug mode. 6. Connect the power cable to the rear panel. 7. Connect a USB keyboard to the debug board. 8. Connect a monitor to the debug board. 9. Restart the system. 10. Turn on the monitor. 11. During POST, press F2. If you fail to press F2 before POST is completed, you will need to restart the server. The Setup Main menu will be displayed showing the Setup's menu bar. Use the left and right arrow keys to move between selections on the menu bar. 10 Chapter 2