Acer B247YU User Manual - Page 23
Color
View all Acer B247YU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English 6. Contrast: Adjust the contrast from 0 to 100 Note: Sets the degree of difference between light and dark areas. 7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades. 8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is shown -- 80%, 70%, 60%, or 50 Note: A higher value allows more blue light to pass through, so in order to achieve the best protection, please select a lower value, of which 50% is in the best state and has been tested by TÜV Rheinland and meet the requirements of TÜV Rheinland's "Low Blue Light Content" standard. 9. ACM: Turn ACM on or off Note: Set to "On", will be based on the current screen to dynamic contrast adjustment. 10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology can simulate high-resolution images by boosting the pixel density of the original source to make images sharper and clearer.. Color Picture Color Audio Performance OSD System Move Mode - Stamdard Gamma Color Temp. R Gain G Gain B Gain R Bias G Bias B Bias Enter 2.2 Warm 50 50 50 50 X 50 50 Picture Color Audio Performance OSD System Mode - Stamdard Modes Color Space Grayscale Mode 6-axis Hue 6-axis Saturate Standard Off X Move Enter 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales. 4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard value for Windows).