Acer CB241HYK User Manual

Acer CB241HYK Manual

Acer CB241HYK manual content summary:

  • Acer CB241HYK | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer CB241HYK | User Manual - Page 2
    . All Rights Reserved. Acer LCD Monitor User's Guide Original Issue: 01/2016 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary
  • Acer CB241HYK | User Manual - Page 3
    following are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the
  • Acer CB241HYK | User Manual - Page 4
    power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not
  • Acer CB241HYK | User Manual - Page 5
    or its equivalent, 4.5 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to performance, indicating a need for service • the product does not operate normally after following the operating instructions v
  • Acer CB241HYK | User Manual - Page 6
    and obey all signs and instructions. Potentially explosive atmospheres include areas . Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment burden placed on the environment. We at Acer are very conscious of the environmental effects of
  • Acer CB241HYK | User Manual - Page 7
    instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer
  • Acer CB241HYK | User Manual - Page 8
    Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips: • refrain from staying too long in one fixed posture • avoid slouching forward and/or leaning
  • Acer CB241HYK | User Manual - Page 9
    Developing good work habits Develop the following work habits to make your computer use more relaxing and productive: • Take short breaks regularly and often. • Perform some stretching exercises. • Breathe fresh air as often as possible. • Exercise regularly and maintain a healthy body. ix
  • Acer CB241HYK | User Manual - Page 10
    Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: LCD Monitor Trade Name: Acer Model Number: CB241HYK SKU Number: CB241HYK xxxxxx; ("x" = 0~9, a ~ z, A ~ Z, or blank) To which this declaration refers conforms to the
  • Acer CB241HYK | User Manual - Page 11
    for this declaration: Product: Model Number: SKU Number: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: LCD Monitor CB241HYK CB241HYK xxxxxx ("x" = 0~9, a ~ z, or A ~ Z) Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110
  • Acer CB241HYK | User Manual - Page 12
    iv Safe listening iv Warnings iv Using electrical power iv Product servicing v Potentially explosive environments vi Additional safety information vi IT Equipment Recycling Information vi Disposal instructions vii LCD pixel statement vii Tips and information for comfortable use
  • Acer CB241HYK | User Manual - Page 13
    unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide DP cable (Optional) C B 2  1 H K HDMI cable (Optional) DVI(Dual Link) cable (Optional) AC Power cord Audio cable (Optional) MHL cable (Optional
  • Acer CB241HYK | User Manual - Page 14
    English ATTACHING/ REMOVING THE BASE Install: Align the base with the stand and push the base towards the top of the monitor, and then rotate the base clockwise. Tighten the screw clockwise. Remove: Reverse the steps to remove the base. Warning: • Actions below are not allowed while moving and
  • Acer CB241HYK | User Manual - Page 15
    English SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the height/tilt/ swivel/pivot of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 1 2 150mm • Tilt Please see the illustration below
  • Acer CB241HYK | User Manual - Page 16
    • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. English 60o 60 • Monitor Pivot Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise until the monitor stops at 90°. 90o 150 4
  • Acer CB241HYK | User Manual - Page 17
    time from "power saving" mode back to "on" is around 3 seconds. Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host
  • Acer CB241HYK | User Manual - Page 18
    English Connector pin assignment 19-pin color display signal cable 19 171513 11 9 7 5 3 1 18161412 10 8 6 4 2 PIN No. Description 1 TMDS Data2+ 3 TMDS Data2- 5 TMDS Data1 Shield 7 TMDS Data0+ 9 TMDS Data0- 11 TMDS Clock Shield 13 CEC 15 SCL 17 DDC/CEC Ground 19 Hot Plug Detect *
  • Acer CB241HYK | User Manual - Page 19
    English 24-pin color display signal cable* PIN No. 1 2 3 Description TMDS data 2TMDS data 2+ TMDS data 2/4 shield 4 TMDS data 4- 5 TMDS data 4+ 6 DDC clock 7 DDC data 8 NC 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 TMDS data 3- PIN No. 13 14 15 16 17 18 19 20 21 22
  • Acer CB241HYK | User Manual - Page 20
    English Standard timing table Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25* VGA VGA VGA MAC VESA SVGA SVGA SVGA SVGA MAC XGA XGA XGA MAC VESA VESA SXGA SXGA VESA WXGA WXGA+ WSXGA+ FHD UHD UHD 640x480@60Hz 640x480@72Hz 640x480@75Hz [email protected] 720x400@70Hz 800x600@
  • Acer CB241HYK | User Manual - Page 21
    on the monitor first, then the computer. This sequence is very important. 5 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. HDMI HDMI AUDIO AUDIO IN DP HDMI DVI(Dual Link) In order to prevent damage to the monitor, do not lift the
  • Acer CB241HYK | User Manual - Page 22
    to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Empowering: Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. AUTO Exit OSD If the OSD is active, press AUTO to exit the OSD. MENU OSD functions
  • Acer CB241HYK | User Manual - Page 23
    , a floating dialog box indicates:"No Cable Connect" or "No Signal" Acer eColor Management mpowering Technology User ECO Standard Graphics Movie Adjust/Exit Operation instructions Step 1: Press " " Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press " "/ or
  • Acer CB241HYK | User Manual - Page 24
    the picture quality, OSD position and general settings. For advanced settings, please refer to following page: Adjusting the picture quality Picture Acer eColor Management Blue Light Off Brightness Contrast Colour Temp Gamma Super Sharpness sRGB mode 100 50 Blue Light 2.2 Off Off Exit Enter
  • Acer CB241HYK | User Manual - Page 25
    Adjusting the OSD position OSD OSD Timeout 10 Exit Enter 1. Press the MENU key to bring up the OSD. 2. Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. 13
  • Acer CB241HYK | User Manual - Page 26
    Adjusting the setting Setting Wide Mode DDC/CI ACM Input DP Format Language Reset Full ON OFF VGA DP1.2 English Exit Enter 1. Press the MENU key to bring up the OSD. 2. Using the // keys, select feature you wish to adjust. Setting from the OSD. Then navigate to the 3. The Setting menu can be
  • Acer CB241HYK | User Manual - Page 27
    Product information Information 3840x2160 H:135KHz V:60Hz HDMI Input S/N: ETL5309132635038083742 Exit Enter 1. Press the MENU key to bring up the OSD. 2. Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. 15
  • Acer CB241HYK | User Manual - Page 28
    for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. DVI(Dual Link)/ HDMI mode Problem No system is switched on and in power saving/standby mode. DP mode Problem No picture visible LED status Blue Remedy Using the OSD, adjust brightness
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Acer LCD Monitor
User’s Guide