Acer ConceptD CT300-52A User Manual - Page 18
Graphic board
View all Acer ConceptD CT300-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
14 - UPGRADING YOUR COMPUTER Graphic board The computer contains one or two Graphic boards installed in the PCIE x16 slots. The detail configuration will be differed by different models. Removing the Graphics board 1. Perform the Pre-installation instructions on page 2. 2. Disconnect the power cables from the graphics board. 3. Remove the three screws that secures the graphics board to the chassis.
-
UPGRADING YOUR COMPUTER
14
Graphic board
The computer contains one or two Graphic boards installed in
the PCIE x16 slots. The detail configuration will be differed by
different models.
Removing the Graphics board
1.
Perform the
Pre-installation instructions on page 2
.
2.
Disconnect the power cables from the graphics board.
3.
Remove the three screws that secures the graphics
board to the chassis.