Acer DW271HL User Manual - Page 10
Attaching / Removing the base, Adjusting the screen position, Connecting the power cord
View all Acer DW271HL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 10 Attaching / Removing the base Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface - use a cloth to avoid scratching the screen. To install, align the base with the stand and push the base towards the top of the monitor. Tighten the screw clockwise. Reverse the steps to remove. Adjusting the screen position In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure. The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated by the arrow. Object/ Part No. Power Adaptor Manufacturer/ Trademark DELTA Type/ Model ADP-40PH BB Connecting the power cord • Check first to make sure that the power cord you use is the correct type required for your area. • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC inlet and plug the other end to a proper AC outlet.