Acer EB490QK User Manual - Page 20

USER CONTROLS Power Switch / Power LED: To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu DC B A Power Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. empowering Press the Empowering Key to open the Acer eColor Management OSD and accessthe scenario modes. PIP Picture in picture hotkey Press this button to active the picture-in-picture function. MENU OSD functions Press this botton to activate the OSD menu. Volume Up / Down Press to adjust volume. INPUT Input Key Use Input key to select from different video sources that may be connected to your monitor. (a) VGA input (b) HDMI input (b) DP input As you cycle through the sources you will see the following messages on right top side of screen to indicate currently selected input source. It may take 1 or 2 seconds for the image to appear. VGA or HDMI1 or HDMI2 or HDMI3 or DP If either VGA or HDMI1 or HDMI2 or HDMI3 or DP input is selected ,but the VGA or HDMI1 or HDMI2 or HDMI3 or DP cables are not connected, a floating dialog box indicates: "No Cable Connect" or "No Signal" AUTO Auto Adjust Press this button to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus (Only for VGA Mode). 9