Acer FL8630 User Manual - Page 39
Default Adjustment
View all Acer FL8630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
28 Default Adjustment English Language Menu Display Time Menu Position Projector Installation Auto Source Input Source Power Settings Sets a language for the OSD menus. Use to select your preferred language. Sets the length of time the On Screen Display will remain active after your last key press. Sets the On Screen Display menu position. • Front Table: The factory default setting. • Front Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. • Rear Table: When you select this function, the projector reverses the image so that you can project behind a translucent screen. • Rear Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. When this function is turned "On", the projector will search for other signals if the current input signal is lost. When this function is turned "Off", it will only search a specified connection port. Use this option to enable/disable input sources. Press "ENTER" to enter the sub menu and select which sources you require. Press "ENTER" to finalize the selection. The projector will only search for inputs that are enabled. AC Power On Selecting "On" enables the function. The projector will automatically turn on when power is supplied via the power cord. IO Power On Selecting "On" to enables this function. The projector will automatically turn on when a VGA signal is detected, without pressing the power button. Power Off Notice When "On" is selected, a power off message will be displayed after pressing the button. When "Off" is selected, the projector turns off after pressing the button one time. Date & Time Sets the date and time for this projector. Auto Power Off (min) The projector will automatically shut down while there is no signal input detected after the time you set. Customize Power Off (Hours)