Acer G247HYL User Manual - Page 19

English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (1) Make sure both the monitor and computer are switched off. (2) DVI Cable (Optional, only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DVI cable to the computer. (3) HDMI Cable (Optional, only HDMI-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. d Connect the audio cable (Optional, only Audio-input Model). 2 Connect the adapter a Connect the AC cord to the adapter. b Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet. 3 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. HDMI DVI-IN VGA IN AUDIO IN HDMI HDMI HDMI HDMI DVI VGA AUDIO IN DVI VGA IN AUDIO DC IN Note: Audio output is only for audio output model. In order to prevent damage to the monitor, do not lift the monitor by its base. 7