Acer G247HYU User Manual - Page 19

INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Digital Cable (Only Dual-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's port. 1-2 Connect HDMI Cable (Only HDMI-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. Or connect the MHL cable (Only for MHL-Input Model)(Optional) to the portable device. 1-3 Connect DP Cable (Only DP-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DP cable to the computer. 2. Connect the Audio Cable (Optional) 3. Connect the adapter a. Connect the AC cord to the adapter. b. Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet. 4. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 5. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. DC-IN AUDIO-IN DP DVI-D IN HDMI DC DC-IN AUDIO-IN DP HDMI DVI DP DVI-D IN HDMI DC-IN AUDIO-IN DP DVI-D IN HDMI EN-10