Acer G310 Altos G310 Service Guide - Page 59

Standard Disassembly Procedure This section tells you how to disassemble the system when you need to perform system service. Please also refer to the disassembly video, if available. CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it. Removing the Housing Cover 1. Remove the two thumbscrews located at the rear end of the left panel. 2. Slide the left panel rearward before detaching it from the chassis. 3. Unlock the door with the key to release the side panel. 4. Push the latch and open the front panel to more than a 45 degrees angle and move it away from the chassis. Removing the CD-ROM, Floppy and HDD 1. Disconnect the CD-ROM power cable and IDE cable 2. Disconnect the floppy power cable and IDE cable 3. Disconnect the hard disk drive power cable and IDE cable 51 Altos G310