Acer GT7700-UQ9300A User Manual - Page 77
Removing and installing an optical drive
View all Acer GT7700-UQ9300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
English 65 Removing and installing an optical drive The system supports a variety of storage devices for additional storage capacity and scalability. To remove an optical drive: 1 Perform the preinstallation instructions described on page 56. 2 Remove the front bazel. 3 Disconnect the power and data cables from rear of the old drive. 4 Move the release slider of the selected drive to the unlock position. 5 Pull the drive out of the device bay. 6 Observe the post-installation instructions described on page 57. To install a new optical drive: 1 Perform steps 1 through 5 of the previous section. 2 Remove the new optical drive from its protective packaging. 3 Slide the new optical drive into the empty drive bay. 4 Move the release slider into the lock position. 5 Connect the power and data cables to the rear of the new drive. 6 Observe the post-installation instructions described on page 57.