Acer H226HQL User Manual - Page 25
Troubleshooting
View all Acer H226HQL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF · Check the power switch. No Picture · Check if AC power cord is properly connected to the monitor. LED displays blinking blue · Check if video signal cable is properly connected at the back of monitor. · Check if the power of computer system is ON. Unstable Picture · Check if the specification of graphics adapter and monitor is in compliance which may be causing the input signal frequency mismatch. Abnormal Picture Display is · Using OSD, adjust RESOLUTION, CLOCK, missing, center CLOCK-PHASE, H-POSITION and V- shift, or too POSITION with non-standard signals. small or too large in display · Using OSD, in case of missing full-screen size image, please select other resolution or other vertical refresh timing. · Wait for a few seconds after adjusting the size of the image before changing or disconnecting the signal cable or powering OFF the monitor. Abnormal Sound(Only Audio-Input model) (Optional) No sound, or sound level is too low · Check the audio cable with the host PCis connected. · Check if the volume setup of the hostPC is in minimum position and try toraise the volume level. EN-16