Acer H5385BDi User Manual - Page 51
Management
View all Acer H5385BDi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
40 English Management ECO Mode High Altitude Turn Off Mode Auto Shutdown Menu Display Time (Seconds) Auto Power On Control Panel Lock Lamp Information Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Gray out ECO mode item while either Lumisense or BluelightShield item is "On". Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. • Standard: Properly shuts down the projector after fan cooling. • Instant Resume: Resumes the system when the Power button is pressed again within 2 minutes. The projector will automatically shutdown when there is no signal input after the allocated time. (default is 15 minutes) Choose the OSD menu display time. (Default is 15 seconds). Select "Manual" to turn off main menu/one direct-key menu manually by user. AC Power On Choose "On" to power on projector while AC power plug in. HDMI Power On Choose "On" to power on projector while HDMI power plug in. VGA Power On Choose "On" to power on projector while VGA power plug in. Off Default is set to "Off". Child Lock • Enable "Child Lock" to disable the power key on projector while in the standby mode to avoid power trigger from children. (Take effect after power off). • Disable "Child Lock" temporarily to turn on projector by quick key, holding the power key on projector for 3 seconds. No need to lock any key after power on. Full Lock • Enable "Full Lock" to lock all keys on projector. (Take effect once done the setting; show warning message while user presses keypad.) • Disable "Full Lock" function, press "ENTER" key for 7 seconds. And then, the OSD of "Control Panel Lock" is set to "Off" and not required to go back to "Full Lock" again. • Pop up a warning message: To disable "Full Lock" function, press "ENTER" key for 7 second, while user presses any key on keypad panel under "Full Lock" mode. Lamp Hour Elapse Displays the lamp's elapsed operating time (in hours). Lamp Reminding Activate this function to display a reminder to change the lamp 30 hours before its expected end-of-life. Lamp Hour Reset Choose "Yes" and press "ENTER"to turn the lamp hour counter to 0 hours.