Acer KA241Y User Manual with DVI - Page 19
Installation
View all Acer KA241Y manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect the video cable a Make sure both the monitor and computer are switched off. b Connect the VGA video cable to the computer. c Connect the digital cable (only for dual-input models). (1) Make sure both the monitor and computer are switched off. (2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computer's port. d HDMI Cable (Only HDMI Input Model). (1) Make sure both the monitor and computer are switched off. (2) Connect the HDMI cable to the computer. 2 Connect the power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3 e Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 5 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem. HDMI DVI-D IN VGA IN D-Sub DVI HDMI HDMI DVI-D IN optional