Acer KE2 User Manual - Page 22
Color
View all Acer KE2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales. 4. The Picture menu can be used to adjust the Brightness, Contrast, Black Boost, Low Blue Light, ACM,Super Sharpness,Auto Config,H. Position,V. Position,Focus and Clock. 5. Brightness: Adjust the brightness from 0 to 100 Note: Adjusts the balance between light and dark shades. 6. Contrast: Adjust the contrast from 0 to 100 Note: Sets the degree of difference between light and dark areas. 7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades. 8. Low Blue Light: Filters out Low blue light to protect your eyes by adjusting how much blue light is shown -- Standard, Level 1,Level 2, Level 3 or Level 4. 9. ACM: Turn ACM on or off. Note: Set to "On", will be based on the current screen to dynamic contrast adjustment. 10. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology can simulate high-resolution images by boosting the pixel density of the original source to make images sharper and clearer.. Color Picture Color Audio Performance OSD System Move Mode - Stamdard Gamma Color Temp. R Gain G Gain B Gain R Bias G Bias B Bias Enter 2.2 Warm 50 50 50 50 X 50 50 Mode - Stamdard Picture Color Audio Performance OSD System Modes sRGB Mode Grayscale Mode 6-axis Hue 6-axis Saturate Off Off X Move Enter 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. 3. Toggle to the left or right to adjust the sliding scales.