Acer Nitro AN515-53 User Manual - Page 42
Battery pack, Battery characteristics, Charging the battery, ATTERY - 42
View all Acer Nitro AN515-53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
42 - Battery pack BATTERY PACK The computer uses an embedded Lithium battery that gives you long use between charges. Battery characteristics The battery is recharged whenever you connect the computer to the AC adapter. Your computer supports charge-in-use, enabling you to recharge the battery while you continue to operate the computer. However, recharging with the computer turned off significantly reduces charge time. The battery will come in handy when you travel or during a power failure. Charging the battery Plug the AC adapter into the computer, and connect to a mains power outlet. Note You are advised to charge the battery before retiring for the day. Charging the battery overnight before traveling enables you to start the next day with a fully charged battery. Conditioning a new battery pack Before you use a battery pack for the first time, there is a conditioning process that you should follow: 1. Connect the AC adapter and fully charge the battery. 2. Turn on the computer and complete setting up the operating system. 3. Disconnect the AC adapter. 4. Operate the computer using battery power. 5. Reconnect the AC adapter and fully charge the battery again. Follow these steps again until the battery has been charged and discharged three times.