Acer P1285 User Manual - Page 55
Using the inner connector(s
View all Acer P1285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
English 45 Using the inner connector(s) Turn the projector off by pressing (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord. 1 Use a screwdriver to remove the screw(s) from the cover. (Illustration #1) 2 Push up and remove the cover. (Illustration #2) 3 Locate the HDMI (MHL) connector beside the focus/zoom ring. 4 Insert the WirelessHD dongle (MWIHD1) or other HDMI/MHL dongle into the HDMI (MHL) connector. (Illustration #3) 5 A micro USB cable is also available if you need to power the HDMI/MHL dongle. 6 Replace the cover and tighten the screw(s). (Illustration #4 - #5) 2 4 1 3 5 5 1
45
English
Using the inner connector(s)
Turn the projector off by pressing
(POWER). Allow the projector at least 45
minutes to cool down. Disconnect the power cord.
1
Use a screwdriver to remove the screw(s) from the cover. (Illustration #1)
2
Push up and remove the cover. (Illustration #2)
3
Locate the HDMI (MHL) connector beside the focus/zoom ring.
4
Insert the WirelessHD dongle (MWIHD1) or other HDMI/MHL dongle into
the HDMI (MHL) connector. (Illustration #3)
5
A micro USB cable is also available if you need to power the HDMI/MHL
dongle.
6
Replace the cover and tighten the screw(s). (Illustration #4 - #5)
3
2
1
1
5
4
5