Acer P6200S User Manual - Page 42
Management
View all Acer P6200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
English 32 LAN Lock to user startup screen Default Lock User Startup Screen is "Off". If lock user startup screen is "On", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "Off" to unlock startup screen. LAN Default is "Off". Choose "On" to enable LAN connection. If users want to do LAN control under standby mode, change VGA OUT (Standby) from Off to On. LAN IP/Mask Identify IP and Mask address. LAN Reset Reset LAN function. Control Channel Default is "RS232/LAN". Choose "HDBaseT" to enable HDBaseT connection HDBaseT IR Carrier Default is "Off", Choose "On" to enable HDBaseT IR Carrier function. Note: Functions vary depending on model definition. Management ECO Mode High Altitude Turn Off Mode Auto Shutdown AC Power On Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. • Instant Off: Shuts down the projector without fan cooling. • Instant Resume: Resumes the system when the Power button is pressed again within 2 minutes. The projector will automatically shutdown when there is no signal input after the allocated time. (default is 120 minutes) Choose "On" to power on projector while AC power plug in. Displays the lamp's elapsed operating time (in hours). Activate this function to display a reminder to change the lamp 30 hours before its expected end-of-life. Press the button and choose "Yes" to turn the lamp hour counter to 0 hours. Note: Functions vary depending on model definition.