Acer PE270K User Manual - Page 18
Connecting the cables
View all Acer PE270K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting the cables To install the monitor on your host system, please follow the steps below: 1. Turn off your computer and unplug your computer's power cord. 2. Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor, and the DP (optional) and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector. 3. USB 3.0 Type C-C Cable (Optional, USB Type-C-C input models only) Connect one end of the USB 3.0 type C-C cable (optional) to your computer and connect the other end to your electric devices. 4. Connect the USB Cable(Optional) Connect the USB 3.0 cable to port for fast charge. Connect the USB 3.0 cable to port. 5. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable. 6. Insert the monitor power cable into the power port at the back of the monitor. 7. Plug the power cords of your computer and your monitor into a nearby electrical outlet. Note: Audio output is only for audio output model. Please check user manual for more instruction. FreeSync (HDMI/DP): It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update. PE270K User Guide English 8