Acer PREDATOR X32 FP Quick Start Guide - Page 1

English Acer Gaming Monitor Quick Start Guide (QSG) Important safety instructions Please read the following instructions carefully. ͻ To clean the monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location. ͻ Turn off the monitor and unplug the power cord. ͻ Spray a non-solvent cleaning solution onto a rag and clean the screen gently. ͻ EsZ^WZzKZWKhZEz>/Yh//Zd>zKEdKd,^ZEKZ KEKdh^EzDDKE/KZ>K,K EZ^KEd,/^W>z^ZEKZ^͘ ͻ Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. ͻ Do not place the monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. ͻ Do not apply pressure to the screen. Excessive pressure may cause permanent damage to the display. ͻ Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature. ͻ Store the monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the monitor outside this range may
result in permanent damage. ͻ Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur: ͻ Monitor-to-PC signal cable is frayed or damaged. ͻ Liquid spills onto the monitor or the monitor is exposed to rain. ͻ The monitor or case is damaged. Connecting your monitor to a computer 1. Connect the monitor to your computer using an HDMI or DP cable. 2. Connect the power adapter to the DC-in port on the monitor. 3. Connect the power cord to the power adapter. 4. Fully insert the power cord plug into the power outlet socket. Note: Transmitting the 4K 160Hz signal via one HDMI 2.1/DP 1.4/Type-C port requires DSC (Display Stream Compression) functionality. If your computer's USB-C port does not have DP-Alt, please connect HDMI/DP+USB-B to computer 1 and HDMI/DP+USB-C to computer 2. HDMI1 HDMI2 HDMI3 HDMI4 DP HDMI DP DP HDMI1 / HDMI2 / HDMI3 / HDMI4 Gaming Monitor Quick Setup Guide