Acer Power F5 Aspire T650/E500 and Power F5 Service Guide - Page 50

Integrated Peripherals All onboard peripherals can be set up through this menu. CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc. Integrated Peripherals USB 2.0 Support USB Controller USB Keyboard Support USB Mouse Support AC97 & Azalia LINK A Onboard LAN function Onboard LAN boot ROM Onboard 1394 Controller Serial Port1 Address Serial Port2 Address Parallel Port Address Parallel Port Mode ECP Mode DMA Channel Parallel Port IRQ [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [3F8/IRQ4] [Disabled] [378] [ECP] [DMA3] [IRQ7] Help Item Options Disabled Enabled mnlk :Move Enter : Select +/-/: Value F10: Save ESC: Exit F9: Load Default Settings F1: General help Parameter USB 2.0 Controller USB Controller USB Keyboard Support USB Mouse Support Onboard LAN function Onboard LAN Boot ROM Onboard 1394 Controller Serial Port 1/2 Address 44 Description Options Enable this item if the system supports USB 2.0 Enabled : Enable USB 2.0 Controller Disabled : Disable USB 2.0 Controller This item is used to enable or disable the on-chip Enabled : Enable USB Controller USB Disabled : Disable USB Controller This item lets you enable or disable the USB keyboard driver within the onboard BIOS. The keyboard driver is simulates legacy keyboard command and lets you use a USB keyboard during POST or after boot if you do not have a USB driver in the operating system Enabled : Enable USB Keyboard Support Disabled : Disable USB Keyboard Support This item lets you enable or disable the USB mouse driver within the onboard BIOS. The keyboard driver simulates legacy mouse command and lets you use a USB mouse during POST or after boot if you do not have a USB driver in the operating system. Enabled : Enable USB Mouse Support Disabled : Disable USB Mouse Support This function is used to set whether the onboard Enabled LAN card is enabled. Disabled This function decide whether to invoke the boot Enabled ROM of the onboard LAN chip Diabled THis item allows users to enable or disable the onboard 1394 Controller function. Enabled Disabled This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1 or 2 Auto : BIOS will automatically setup the port 1 or 2 address 3F8/IRQ4 (Serial Port 1 default) 2F8/IRQ3 (Serial Port 2 default) 3E8/IRQ4 2E8/IRQ3 Diabled : Disable onboard Serial port 1 or 2 Chapter 2